| CAS No.: | 9003-05-8 |
|---|---|
| Formula: | (C3h5no)N |
| EINECS: | 284-932-5 |
| Color: | White |
| Appearance: | Liquid |
| Specific Usage: | for Biological Purpose, for Microbiological, for M |
| Samples: |
|---|
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier
This product is a good paper in the paper system with no or only a small amount of added aluminum sulfate or PAC.Force enhancing effect, improve retention and filtration of the dry strength agent.In addition, in the anion impurities or high electrolyte concentration of the paper system,Unification can also play a good role.
|
Appearance |
Colorless to light yellow viscosity liquid |
|
|
Content (%) |
15% min |
20%min |
|
Viscosity(25ºC) |
2000-8000cps |
6000-9000cps |
|
PH |
3.5-5.0 |
|
|
Shelf life |
6months min |
3-6months |
3) The main Application:
1.It is specially suitable to Kraft paper,board paper and corrugated paper etc.
2.When diluted with clean water,the dilution multiples of this product is generally about 15 to 30 times.After the product was stirred sufficiently,add uniformly to the slurry in an amount of 5-10kgs for one ton paper.
3.Adding position that selected should have a full contact with the slurry.Generally choose the ingredients pool,high box or import pump.
4.Use a plastic or stainless steel as the material for product's storage,dilution tank,piping etc..Iron-based material will cause corrosion and thickening phenomenon.
5.Do not mix with other chemicals when storage or using.
4) The main description:
It is the copolymer of acrylamidee and acrylic acids,using polymer mesh structure to increase hydrogen bonding number in the mutual area of fiber to fiber.Its combination area of long chain polymers can be deformed,thus increasing the bond toughness.It could improve the tensile strength,pls bond,stiffness, ring-crush strength, bursting strength, folding endurance and other physical index.And it also can improve the retention rate of the fine fiber and filler and drainage performance.
1, With industrial water or tap water evenly diluted more than 10 times, add to the slurry. Depending on the state of the dilution sometimes required. The dilution ratio should be changed appropriately.
2. It is recommended to use continuous dilution adding device due to high viscosity.Regarding the order of addition, depending on the other chemicals used,
Need to make a proper choice, details can consult our technical service personnel.
Packing: 200kg PE drum or 1000kg IBC drum.
Storage: Store in a cool, dry place, protecting from moisture. When loading and unloading, you should take care to prevent packaging and containers being damaged, avoiding leakage.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}