Water-Based Adhesive: This product is a water-based adhesive designed for the head transfer of toilet paper rolls.
Performance: It has excellent initial tack, with a long initial tack time, and can be easily peeled off after drying. It has broad equipment adaptability and still performs well at high machine speeds, with a reduced likelihood of "flower cores" or "slippage."
Dilution: The product can be diluted with water. Depending on the type of paper and equipment, the recommended dilution ratio (adhesive: water) is 1:1 to 1:3.
Detailed Photos
Product Parameters
Technical Parameters: Appearance: Light yellow or white semi-transparent liquid Brix: 5±2% Viscosity: 10,000-30,000 cps (measured with RVDV-II+ Brookfield viscometer, spindle 6# at 10 RPM, 25°C) pH Value: 5.0-8.0
Precautions:
When diluting the product with water, it should be thoroughly stirred to achieve the best results.
This product should not be mixed with other adhesives to avoid deteriorating adhesive performance or causing reactions that change its properties.
The product should be sealed promptly if not fully used, and tools and machinery should be cleaned before the adhesive dries.
If the customer adds water or other substances to the adhesive, leading to quality issues, these are not covered under controlled usage conditions, and the company will not assume any responsibility.
Packaging & Shipping
Equipment Cleaning: Can be cleaned with water Packaging: 50kg drum Storage: The product should be stored in a cool, ventilated place with an ambient temperature of 10-40°C. The shelf life is six months, and the product should be sealed if not fully used.
Note: The above technical information is for reference only. Customers are advised to test the applicability of this product before using it. Our company will not bear any economic losses caused by operating errors or improper use. If you have any objections, please raise them within one week, otherwise it will be deemed as default.